Web-ALARM
 Web-ALARM controller module
This is the heart of the alarm system. It contains all of the control logic, alarm settings and the web configuration interface. It communicates to the outside world via an IP connection and is configured using a standard browser. It supports up to 16 additional binary or 8 analogue and 8 binary fixed wired alarm points. Binary points can be normally open or closed volt free contacts. This module also supplies regulated power for the I/O modules.
Web-ALARM I/O modules
There is a choice of 2 models, Web-Alarm 16 or Web-Alarm 88.
The Web-Alarm 16 module is fitted with 16 binary inputs accepting a dry contact switching to ground.
The Web-Alarm 88 module is fitted with 8 binary inputs accepting a dry contact switching to ground and 8 analogue inputs accepting 0-10V signals with each input having a resolution of 12 bits.
Web-Alarms

Alarms in the Web-ALARM system can be generated by any point. Alarms send notifications by email and also can send an SMS message via an emailSMS service. A central strobe light is fitted and will operate whenever any alarm is active.
A sonalert siren with mute button is fitted and will trigger with any alarm.
This could be useful for providing a local user alert or for establishing fault-tolerant control.

 Web-Alarm 16
Module is fitted with 16 binary inputs accepting a dry contact switching to ground.

Web-Alarm 88.
Module is fitted with 8 binary inputs accepting a dry contact switching to ground and 8 analogue inputs accepting 0-10V signals with each input having a resolution of 12 bits.
Web-ALARM